- Porter Cable 890 Router Manual
- Porter Cable 890 Router Review
- Porter Cable 890 Router Specs
- Porter Cable 890 Router Price
General safety rules, Router toupie rebajadora, Definitions - safety guidelines
ROUTER
View and Download Porter-Cable 690LRVS instruction manual online. Porter-Cable Router Instruction Manual. 690LRVS Network Router pdf manual download. Also for: 691, 690lr, 6931.
TOUPIE
Porter Cable 890 Router Manual 5AM). Porter Cable FN250B 16 Gauge Finish Nailer In Case with Manual! Porter-Cable 75301 Router Height Adjustment Kit for 890 Series Fixed Porter Cable. The holes don't seem to line up when I try to atta. Porter-Cable Router 890 Series. How do you raise/lower the base on the porter cabl. PORTER-CABLE® routers are built with woodworkers in mind. Our selection includes compact routers, production routers, and mid-size routers. Shop our woodworking routers. Select Language User Menu Search Submit View All Results. Owner Manuals.
REBAJADORA
®
DEFINITIONS - SAFETY GUIDELINES
indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
indicates a potentially haz ard ous situation which, if not
avoided, may result in minor or mod er ate injury.
used without the safety alert symbol indicates potentially
hazardous situation which, if not avoided, may result in property damage.
General Safety Rules
Read all instructions. Failure to follow all instructions listed below may result in electric
shock, fi re and/or serious injury. The term “power tool” in all of the warnings listed below refers to your
mains-operated (corded) power tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1)
Work area safety
a)
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the presence of
fl ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c)
Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
2) Electrical
safety
a)
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
anyadapter plugs with earthed (grounded) power tools. Unmodifi ed plugs and matching
outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, rang-
es and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
c)
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock. Use only 3-wire extension cords that
have 3-prong grounding-type plugs and 3-pole receptacles that accept the tool’s plug.
e)
When operating a power tool outdoors, use an extension cord suitable for outdoor
use. If an extension cord is to be used outdoors, it must be marked with the suffi x W-A or
W following the cord type designation. Use of a cord suitable for outdoor use reduces the
risk of electric shock. When using an extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. The following table shows the correct size to use
depending on cord length and nameplate ampere rating. If in doubt, use the next heavier
gauge. The smaller the gauge number, the heavier the cord.
Minimum Gauge for Cord Sets
Volts
Total Length of Cord in Feet
120V
0-25
26-50
51-100
101-150
Ampere Rating Gauge of wire in AWG units
From 10 to 12 amps 16
16
14
12
“ 12 to 16 amps 14
12
Not recommended
3) Personal
safety
a)
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the infl uence of drugs, al-
cohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
b)
Use safety equipment. Always wear eye protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate condi-
tions will reduce personal injuries.
c)
Avoid accidental starting. Be sure the switch is in the off-position before plugging in.
Carrying power tools with your fi nger on the switch or plugging in power tools that have the
switch on invites accidents.
d)
Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
e)
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
Instruction Manual
Manuel d’Utilisation
Manual de Instrucciones
Copyright © 2006 Porter-Cable
www.porter-cable.com
Instructivo de operacion,
centros de servicio y poliza de garantia.
ADVERTENCIA: Lease este instructivo antes de usarel producto.
A19589-03-19-07 Rev. A
891, 892, 893PK, 894PK & 895PK
f)
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in mov-
ing parts. Air vents often cover moving parts and should also be avoided.
g)
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of these devices can reduce dust-
related hazards.
4) Power tool use and care
a)
Do not force the power tool. Use the correct power tool for your application. The cor-
rect power tool will do the job better and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source before making any adjustments, chang-
ing accessories, or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tools operation. If dam-
aged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc., in accordance with these instruc-
tions and in the manner intended for the particular type of power tool, taking into ac-
count the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
5)
Service
a)
Have your power tool serviced by a qualifi ed repair person using only identical re-
placement parts. This will ensure that the safety of the power tool is maintained.
ADDITIONAL SPECIFIC SAFETY RULES
•
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may
contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of
the tool “live” and shock the operator.
•
Use clamps or another practical way to secure and support the workpiece to a stable platform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
•
Metal cutting with router: If using router for metal cutting, clean out tool often. Metal dust and chips
often accumulate on interior surfaces and could create a risk of serious injury, electrical shock or
death.
•
Never run the motor unit when it is not inserted in one of the router bases. The motor is not
designed to be handheld.
•
Keep handles dry, clean, and free from oil and grease. This will enable better control of the tool.
•
Keep hands away from cutting area. Never reach under the workpiece for any reason. Keep the
router base firmly in contact with the workpiece when cutting. Hold the router only by the handles.
These precautions will reduce the risk of personal injury.
•
Use sharp cutters. Dull cutters may cause the router to swerve or stall under pressure.
•
Never touch the bit immediately after use. It may be extremely hot.
•
Be sure that the motor has stopped completely before you lay the router down. If the cutter head
is still spinning when the tool is laid down, it could cause injury or damage.
•
Be sure that the router bit is clear of the workpiece before starting the motor. If the bit is in con-
tact with the workpiece when the motor starts it could make the router jump, causing damage or
injury.
•
Do not press spindle lock button while the motor is running. Doing so can damage the spindle lock.
Wear appropriate hearing protection during use [ANSI S12.6 (S3.19)]. Under some con-
ditions and duration of use, noise from this product may contribute to hearing loss.
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paint.
• crystalline silica from bricks and cement and other masonry products.
• arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment,
such as those dust masks that are specially designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with soap and water.
Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful
chemicals.
Use of this tool can generate and/or disburse dust, which may cause serious and
permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles away from face and body.
ALWAYS USE SAFETY GLASSES.(ANSI Z87.1) and (CAN/CSA Z94.3) Everyday eye-
glasses are NOT safety glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS
WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3)
• ANSI S12.6 (S3.19) hearing protection
• NIOSH/OSHA/MSHA respiratory protection
SYMBOLS
The label on your tool may include the following symbols. The symbols and their definitions are as
follows:
V....................... volts A...........................amperes
Hz .................... hertz
W .........................watts
min .................. minutes
.......................alternating current
............... direct current
no .........................no load speed
.................... Class I Construction
.........................earthing terminal
(grounded)
........................safety alert symbol
..................... Class II Construction
…/min .................revolutions or reciprocations
(double insulated)
per minute
BPM ..............beats per minute
SAVE THESE INSTRUCTIONS
Do not operate your tool on a current on which the voltage is not within correct limits.
Do not operate tools rated A.C. only on D.C. current. To do so may seriously damage the tool.
OPERATION
To reduce the risk of injury, turn unit off and disconnect it from power source before
installing and removing accessories, before adjusting or when making repairs. An accidental start-up
can cause injury.
Use router bits with a diameter larger than 2-1/2' ONLY when the speed control is set
between 10,000 and 13,000 RPM. The maximum diameter bit is 3-1/2'.
Disconnect tool from power source when router is not in use.
INSTALLING AND REMOVING THE BIT (FIXED BASE ONLY)
To reduce the risk of injury, turn unit off and disconnect it from power source before
installing and removing accessories, before adjusting or when making repairs. An accidental start-up
can cause injury.
1.
To remove the motor unit from the base unit:
(a) Open the clamp (A) Fig. 1.
(b) Push the lever (B) Fig. 1 toward the power unit.
(c) Lift the power unit free from the base unit.
2.
Clean and insert the shank of the bit into the collet until the shank bottoms, then back it out
approximately 1/16' (1.6 mm).
3.
Lay the power unit on its side on a bench with the collet pointing AWAY from you.
4.
Press the spindle lock button (A) Fig. 2.
5.
Place the wrench on the collet and turn CLOCKWISE to tighten. Tighten firmly.
6.
To remove the bit, reverse the procedure.
Avoid possible damage to the collet. Never tighten the collet without a bit.
INSTALLING THE MOTOR
To reduce the risk of injury, turn unit off and disconnect it from power source before
installing and removing accessories, before adjusting or when making repairs. An accidental
start-up can cause injury.
FIXED BASE
1. Open the clamp (A) Fig. 1 and set motor in the base.
2. Align the rack and pin (C) Fig. 1 of the motor with the grooves in the base. Pull the lever
PLUNGE
BASE
1.
Open the clamp (I) FIg. 5 and set the motor in the base.
2.
Align the rack and pin (C) Fig. 1 of the motor with the grooves in the base. Lower the
motor into the base.
3.
Close the clamp (I) Fig. 5.
NOTE: Reverse procedure for both bases to remove the motor.
ADJUSTING ALIGNMENT ON ACCESSORY SUB-BASE (FOR FIXED BASE ONLY)
The sub-base for the 890 fixed base model can be replaced with an accessory sub-base that is
suitable for use with template guides. If you replace the standard sub-base with another, you will
need to be sure the sub-base is aligned to the collet. To do this:
To reduce the risk of injury, turn unit off and disconnect it from power source before
installing and removing accessories, before adjusting or when making repairs. An accidental start-
up can cause injury.
1. Remove the standard large-hole sub-base by removing three screws (A) Fig. 4A. Replace with
accessory sub-base (Fig. 4B), but do not fully tighten screws (A).
2. Open the clamp and adjust the power unit so that the collet nut (A) engages the center hole in
the sub-base (C). Allow the sub-base to center itself on the collet nut. Close the clamp.
3. Tighten the sub-base mounting screws (B) Fig. 4 securely.
ADJUSTING THE DEPTH OF CUT (FIXED BASE ONLY)
To reduce the risk of injury, turn unit off and disconnect it from power source before
installing and removing accessories, before adjusting or when making repairs. An accidental start-up
can cause injury.
1.
Open the clamp (A) Fig. 3.
2. Pull the lever (B) and set the router on the workpiece. With the router flat and level, let the bit barely
touch the workpiece.
3. Hold the lever (B) and turn the depth knob (C) until the zero aligns with the zero mark on the router
base.
4.
Release the lever (B). Make sure that the zero remains aligned with the zero mark.
5.
Turn the knob (C) clockwise to the desired depth of cut.
6.
Close the clamp (A).
NOTE: Setting the index line to 1/16' (1.6 mm) on the knob indicates that the cutting edge of the bit is
exposed 1/16' (1.6 mm) below the base.
DUST EXTRACTION (PLUNGE BASE ONLY)
To reduce the risk of injury, turn unit off and disconnect it from power source before
installing and removing accessories, before adjusting or when making repairs. An accidental start-up
can cause injury.
To connect the router to a vacuum cleaner for dust extraction, follow these steps:
1.
Remove the dust cap (E) Fig. 6 by pulling straight up.
2.
Insert the dust extraction hose adapter (F) into the dust extraction port (G) as shown.
3.
Insert the end of a standard vacuum cleaner tube (H) into the hose adapter.
4.
When using dust extraction, be aware of the placement of the vacuum cleaner. Be sure that
the vacuum cleaner is stable and that its hose will not interfere with the work.
NOTE:
Be sure the dust shroud (S) Fig. 5 is installed into the plunge base as shown.
INSTALLING AND REMOVING THE BIT (PLUNGE BASE ONLY)
To reduce the risk of injury, turn unit off and disconnect it from power source before
installing and removing accessories, before adjusting or when making repairs. An accidental start-
up can cause injury.
To remove the motor unit from the base:
1.
Pull the lever (I) Fig. 5 toward you.
2.
Remove the power unit from the base.
3.
Clean and insert the shank of the bit into the collet until the shank bottoms, then back it out
approximately 1/16' (1.6 mm).
4.
Lay the power unit on its side on a bench with the collet pointing AWAY from you.
5.
Press the spindle lock button (A) Fig. 2.
6.
Place the wrench on the collet and turn CLOCKWISE to tighten. Tighten firmly.
7.
To remove the bit, reverse the procedure.
ADJUSTING THE DEPTH OF CUT (PLUNGE BASE ONLY)
To reduce the risk of injury, turn unit off and disconnect it from power source before
installing and removing accessories, before adjusting or when making repairs. An accidental start-up
can cause injury.
1.
Loosen the depth rod locking knob (J) Fig. 6, and depth indicator knob (K), allowing the depth
rod (L) to contact one of the turret stops (M) Fig. 7. Normally the deepest desired cut is set with
the depth rod resting on the lowest point on the turret dial (N) Fig. 6. You can also utilize any
combination of fixed and/or adjustable stops (M) to achieve the desired depth of cut.
2.
Push the router down until the bit touches the work surface. Push the locking lever (O) down to
lock the router in this position.
3.
Tighten the depth-rod locking knob (J) Fig. 6.
4.
Position the depth indicator (P) Fig. 8 at the “0” position and tighten the knob (K) Fig. 8.
5.
Loosen the depth-rod locking knob (J) Fig. 6, and raise depth rod (L) until the indicator (P) Fig.
8 aligns with the desired depth of plunge measurement (R).
6.
Tighten the depth-rod locking knob (J) Fig. 6.
STARTING AND STOPPING THE MOTOR (ALL UNITS)
Before starting the tool, clear the work area of all foreign objects. Keep a firm grip
on the tool to resist starting torque. Two switches (A and B) Fig. 9 turn this tool “ON” and “OFF”.
The upper switch (A) will automatically turn the tool “OFF” if the tool is placed upside down on a
surface.
Turn the tool “ON” or “OFF” with lower switch (B), using the thumb of the left hand while holding
the tool.
To avoid injury and/or damage to finished work, always allow the motor to come to a
COMPLETE STOP before putting the tool down.
NOTE: For convenient debris collection, you can attach a shop vac to the GripVac™ unit by
placing the hose on the GripVac handle Fig. 17.
VARIABLE SPEED CONTROL (ALL UNITS)
This router is equipped with a variable speed control (A) Fig. 10 with an infinite number of speeds
between 10,000 and 23,000 RPM.
Adjust the speed by turning the speed control knob (A).
In low and medium speed operation, the speed control prevents the motor speed
from decreasing. If you expect to hear a speed change and continue to load the motor, you could
damage the motor by overheating. Reduce the depth of cut and/or slow the feed rate to prevent
tool damage.
A
B
C
Fig. 1
Fig. 11
A
SCREW
Fig. 14
A
A
D
Fig. 7
Fig. 8
Fig. 17
A
Fig. 2
Fig. 3
A
B
C
M
K
P
Fig. 9
A
B
Porter Cable 890 Router Manual
Fig. 10
Fig. 15
B
A
E
B
Fig. 16
J
C
H
D
E
F
G
B
A
Porter Cable 890 Router Review
K
L
C
D
O
J
K
L
N
Fig. 6
R
Fig. 12
Fig. 4B
Fig. 4A
A
A
A
B
C
Porter Cable 890 Router Specs
Fig. 5
H
F
G
E
S
I
Fig. 13
5
Porter Cable 890 Router Price
4
1
3
2
1. ROUTER BASE
2. SUB-BASE
3. ROUTER BIT
4. TEMPLET GUIDE
5. LOCKNUT
1. BASE DE LA TOUPIE
2. SOUS-BASE
3. MÈCHE DE TOUPIE
4. GUIDE DE GABARIT
5. CONTRE-ÉCROU
1. BASE DEL REBAJADORA
2. SUB-BASE
3. BROCA
4. GUIA DE PATRON
5. TUERCA INAFLOJABLE